The V100 bulk eraser has been designed to meet the requirements of the high volume user. The bulk degaussing conveyor unit runs continuously and with one pass gives erasure figures in excess of 75dB on 1500 oersted tape.
The Verity V100 degausser has a throughput of over 10,000 cassettes per hour, and capable of handling all compact media from floppy discs to high energy cassettes. The V100 backup tape eraser provides the user with one of the most efficient high energy degaussers available.
Most cassettes and cartridges (see full details )
Floppy discs: 10 packs, Cassettes: including Beta SP, MII, D2 S & M, R-Dat, 8mm VHS, VHS U-Matic, Betacam, 3480,3590; DC600, 1000, Audio Tapes, Beta SP, Digital Beta, VHS Digital, DVC Pro, Digital S, DLT, 2, 3, 4, 5, 6 & SDLT, LTO1, 2, 3, 4, 5, 6 & 7
2 seconds typ.
2,500 Beta SP cassettes per hour typical
The V100 is a conveyor unit and very easy to use. In its standard specification the operator simply presses the “power on” button which turns on the belt and the degaussing field. Four powerful demagnetising heads, two under the belt and two over the belt positioned in a ‘V’ configuration, erase the media as it passes.
The speed of the belt may be adjusted by a rotary knob from zero to 17 inches per second.
The unit can run continuously, 24/7 as the magnet heads are cooled by two powerful thermostatically controlled fans.
The V100 comes with a 12 month back to base, all parts and labor included warranty. Extended warranties also available. We are so confident in our product build quality that whether you opt for an extended warranty or not, our factory-based technical support team are available for free phone and email support. This support extends for the entire lifetime of ownership.
Electronic Sensor: for conveyor belt/magnetic field control. The sensor is mounted on the entrance to the conveyor belt and as the cassette or cartridge is feed onto the unit the conveyor belt and degaussing fields start up. After the last product has been degaussed the belt and degaussing fields stop, controlled by a timer.
Remote Socket: Allows for remote operation of all functions from an alternative control panel. A socket on the rear of the unit give the customer access to the belt and field on/off controls.
Magnetic Field Switch: Allows the magnetic field to be independently controlled. An additional switch on the control panel allow the operator to switch on and off the degaussing fields independent on the Conveyor belt.
Cassettes/Cartridges: including MII, D2 S & M, R-Dat, 8mm VHS, VHS U-Matic, Betacam, 3480,3590; DC600, 1000, Audio Tapes, Beta SP, Digital Betacam, VHS Digital, DVC Pro, HDCAM,Mini, DVCAM.Digital S; DLT, 2, 3, 4, 5, 6 & SDLT, LTO1, 2, 3, 4, 5, 6 & 7
2,500 Beta SP cassettes per hour
220-230 VAC, 50Hz / 208-220 Vac, 60Hz
(Specify voltage and frequency when ordering)
24 Amps, 60Hz or 20 Amps, 50Hz
On/Off Power switch, Variable belt speed control
44.5" x 19" x 20.5" (114cm x 48cm x 52cm)
Packed Dimensions (WxHxD):
50.3" x 26.7" x 26.7" (128cm x 68cm x 68cm)
41°F - 104°F (5°C - 40°C)
10%H – 80%H Without Condensation
12 months back to base, all parts and labor included. Extended warranties also available.
Specifications are subject to change without notice
Note: After degaussing, hard drives should not be reused as they are stressed in the erasure process. Some backup tapes may not be reusable after degaussing due to the servo track being erased.